Aqua-Lab CS1 Prep
Aqua-Lab CS1 Prep

Aqua-Lab CS1 Prep

Easily add or enhance the hand-prep station in your car wash facility. This all-in-one bug prep system offers foamed coverage – fast. The CS1 Prep unit is simple to install, easy to use, and will increase site productivity by giving the user the ability to coat the problem areas on the vehicle with foamed solution in just seconds.

This plug-n-play system is pre-wired and plumbed for water, air, electric, and chemical control. Includes (1) pneumatic actuated water valve, (1) air valve, (1) air regulator with pressure gauge, (1) 2.9 GPM pump, (1) 1 HP Motor, (1) bug prep pressure switch kit, (1) Chem-Flex injector, (1) mounting panel, and (1) foaming prep gun with 13 ft of coiled, dual lumen tubing. Operates on 120V/15A power with an independent on/off switch.

Power: 120 V/1PH/60Hz/15A
Inlet Water Pressure: 0-60 PSI (0 - 4.1 bar) Inlet Feed at Max. Flow
Operating Water Pressure: 200 PSI (14 bar) Factory Set (Assuming 40 PSI (2.8 bar) City Feed)
Water Inlet Feed: 3/8” ID Inlet (1/2” ID Inlet on Triple Foam)
Water Filtration: 50 Micron (Recommended)
Solution Outlet: Up to 2.25 GPM (8.5 LPM) = 3/8” ID (1/2” OD Polyflow), 3.25 - 4.5 GPM (13.3 - 17 LPM) = 1/2” ID
Maximum Water Source Temperature: 140°F (+60°C)
Air Inlet Pressure: 80-120 PSI (5.5 - 8.3 bar) Dry Air
Air Inlet/Outlet: 3/8” OD Polyflow Tubing
Weight: 50 lbs. (22.7 kg)
Dimensions: 20” L x 12” W x 16” H (51 x 31 x 41 cm)

Part Number
1001661