PC1 All Composite Quick-Connect Single Hose Barb

Composite injectors are designed to stand up to the most aggressive, yet common, car wash chemicals.

Single hose barb Venturi injector for diluting one chemical with water.  The nozzle and body of these injectors are manufactured using a corrosion-resistant composite material, which has been tested by the industry's leading chemical manufacturers with consistently positive results. A Hastelloy® spring, a Teflon® check ball, and an exclusive XFC o-ring material are also used for long life and durability.

Injectors are color-coded based on the water flow needed for each individual application, and combine with color-coded chemical metering tips to proportion the precise chemical mix ratio.

For use with Aqua-Lab Chemical Dispensing Systems.

PC1 injectors are for use with SAM valves only.

Connection Type: PC1 Quick Connect, All Composite
Max Pressure Inlet / Outlet: Up to 250 PSI (17 bar)
Temperature Range: 40º F - 140º F (4º C - 60º C)
Number of Hose Barbs: 1
Maximum Wrench Torque: Hand Tighten Only (30 in-lbs)

Injector Color  Orifice  Flow Rate @ 200 PSI Part Number 
Yellow   0.040"    0.50 GPM    318040
Tan   0.051"  0.75 GPM    318051
Red  0.057"  1.00 GPM  318057
Orange  0.070"  1.50 GPM  318070
Grey  0.083"  2.00 GPM  318083
Dark Blue  0.086"  2.25 GPM  318086
Light Blue 0.095" 3.00 GPM 318095
Light Green  0.098"  3.25 GPM  318098
Pink 0.106" 3.75 GPM 318106

 

PC1 injectors are for use with SAM valves only.