Jason Goodpaster – Schlomka Services
The Machete would be more of a finishing tool, opening up the hole a little bit better, the initially like I said you’d start out with the ripsaw, get the hole cut open and then doing it as a finishing tool, push the dirt, get it into the boom, and it’ll work a lot better.
Andy Keller, Sewer Department Foreman – Big Bear City Community Services District
The Reaper was a huge time saver because we didn’t have to keep pulling out of the lateral. The combination of speed, cutting, and pushing helped us work 2x faster than the nozzle we were using before. The Reaper is now our “first responder” when we need to break lateral stoppages and root intrusions.
Justin Elge, Operator – Midland Pumping Service
The more I use the Reaper, the more it becomes my go-to tool for grease clogs in lines. It has great forward penetration and easily breaks through whatever is stopping me.
Scott Horner, VP of Operations – Terrible Herbst
Terry Rawn, Owner – Hydrovac Nation
“The Ripsaw HD that I have been currently using is amazing! I now have over 700 hours on it, and the cover still looks great. I was operating this nozzle at winter’s end, so it has been through all conditions from thick frost, road pack, and very rocky conditions.”
Jamie Erdman, Manager – Holiday Gas Station
“If someone is looking into the Hydra-Flex [Aqua-Lab SDGEN2] system, I definitely would say go for it and give it a shot because your customers are going to notice it and if you do the unlimited program it’s definitely going to benefit you [...] It’s more beneficial to the customer, it cleans their vehicle the way they want, and they don’t have to get out and wipe down their vehicle afterwards and clean off smudges. It cleans the vehicle properly like a car wash should.”
Rob Parke, President – Subsurface Construction
“As a result from using the Ripsaw HD, the biggest advantage/improvement over other nozzles was the life of the nozzle. Instead of 1-3 weeks before the nozzle needed replacement or repairs, we experienced at least 2x the life of the ocver on the Ripsaw HD nozzle. The Ripsaw HD is now our primary nozzle used and stocked on our trucks. We save money on the number of nozzles used over time and need fewer nozzles in stock at any one point since they get replaced less often.”
Chadwick Kogelschatz, Continuous Improvement Manager – Roskam Baking Company
“Before the Aqua-Rocket, cleaning the oven ductwork with our previous nozzles and cleaning methods meant this process could take as much as 16 hours depending on soil levels and length of previous production runs. After testing and switching to the Aqua-Rocket, this process’ overall completion time dropped by more than 50%. I can’t speak for everyone, but in our industry this is huge because it enables us to repurpose more than 8 employee man hours for other tasks - resulting in finishing cleanups faster and more efficiently!”
Kurtis Webber, Operator – Jet Hydrovac
“Our company has 5 units and they are all equipped with Ripsaws because they withstand the harsh Calgary environment. For about 4 months I have been using my #8 Ripsaw for 2-3 loads a day in -30º C (-22º F) temperatures, running water at 60-70º C (140-160º F), for 8-12 hours a day with little to no effect on the Ripsaw’s performance. The “guts” of the Ripsaw have not needed any replacement or repair, and it still cuts as good as it did right out of the box.”
Eric Murphy, Owner / Member – MB Construction, LLC
“We have over 300 hours on a Ripsaw #6 with no replacements or repairs. I would recommend this product to excavating companies due to its longevity. If you like to do things like MB Construction does- the right way- you need not only a hard working and knowledgable team, but you need reliable equipment as well.”
Bill Martin & Bob Hodge, Owners – Metro Express
Watch a testimonial video where car wash industry veterans, Bill Martin and Bob Hodge, explain why they use the Aqua-Lab™ and the dramatic differences it offers in vehicle coverage, reliability, and chemical/water savings.
Ryan Kuhns, President – Dapper Dan's Car Wash
“My advice to other car wash owners is to not even touch any other chemical dispensing system. Hydra-Flex has specialized and perfected dispensing technology, and has made washing cars simple and trouble free.”
Dan Crader, Owner / Operator – Best Express Car Wash
“Now that we have installed the Blast-Force™ and Blast-Tec Pro™ nozzles, our cost of water is about $0.30 per car. Our initial reason for switching to Hydra-Flex nozzles was to save water, and we have already experienced over 30% savings.”
Leon Beyder, President – Glow Express Car Wash
“The efficiency and consistency of the Aqua-Lab is what puts this system above traditional chemical and dosing equipment. Not only have I experienced savings of about 25% in chemical costs thanks to the Aqua-Lab, but I have also noticed an extremely high yield in my chemicals without sacrificing the appearance of the chemical upon applying.”
Robert Duncan, President – Superior Express, LLC
“The accuracy and reliability of this system is second to none, and there was no question that I would be installing the Aqua-Lab when I built a tunnel wash. Even when moving from an in-bay automatic to a tunnel, the Aqua-Lab was nothing less than I expected: trouble-free and precise chemical distribution to all my wash applications.”